// You can find instructions for this file here:
// http://www.treeview.net

// Decide if the names are links or just the icons
USETEXTLINKS = 1  //replace 0 with 1 for hyperlinks

// Decide if the tree is to start all open or just showing the root folders
STARTALLOPEN = 0 //replace 0 with 1 to show the whole tree

ICONPATH = 'foldimages/' //change if the gif's folder is a subfolder, for example: 'images/'


foldersTree = gFld(" ")

 

 aux1 = insFld(foldersTree, gFld("DC Input - Mosfet Output - 1 Phase - PCB Mounting (WG F8) / Module Board (MMPB)","") )
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
    docAux = insDoc(aux1, gLnk("B", "WGF8  50 D08", "../products/WG F8.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WGF8  60 D10", "../products/WG F8.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WGF8 100 D05", "../products/WG F8.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WGF8 200 D03", "../products/WG F8.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WGF8 400 D01", "../products/WG F8.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "MMPB MODULE BOARD WITH WG F8", "../products/WG MMPB.pdf"))
    docAux.iconSrc = "pdf_logo.gif"

 aux1 = insFld(foldersTree, gFld("DC Input - Mosfet Output - 1 Phase - Chassis Mounting (WG F) ",""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
    docAux = insDoc(aux1, gLnk("B", "WGF 50 D30  :    50Vdc / 30A", "../products/WG F.pdf "))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WGF 100 D15 :   100Vdc / 15A ", "../products/WG F.pdf "))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WGF 200 D10 :   200Vdc / 10A", "../products/WG F.pdf "))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WGF 400 D05 :   400Vdc / 5A  ", "../products/WG F.pdf   "))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WGF 950 D10 :  1000Vdc / 4A  - IGBT OUTPUT", "../products/WG MMPB.pdf "))
    docAux.iconSrc = "pdf_logo.gif"
    

 aux1 = insFld(foldersTree, gFld("DC Input - Triac Output - 1 Phase - PCB Mounting (WG A4/ A8) / Module Board (MMPB)", ""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A4 6D02 Z", "products/WG A4.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A8 6D03 Z/R : 600V peak-off-state / 3A / 24-280Vac", "../products/WG A8 6D.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B","WG A8 6D05 Z/R : 600V peak-off-state / 5A / 24-280Vac", "../products/WG A8 6D.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A8 8D05 Z/R : 800V peak-off-state / 5A / 24-420Vac", "../products/WG A8 8_10_12D.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B","WG A8 10D05 Z/R : 1000V peak-off-state / 5A / 24-480Vac", "../products/WG A8 8_10_12D.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A8 12D05 Z/R : 1200V peak-off-state / 5A / 24-480Vac", "../products/WG A8 8_10_12D.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A8 6 05-PC  : 600V peak-off-state /  5A / 280Vac / Phase Control", "../products/WG A8 6 05 PC.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A8 6 05-LC  : 600V peak-off-state /  5A / 280Vac / Phase Linear Control", "../products/WG A8 6 LC.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A8 6 10-LC  : 600V peak-off-state /  5A / 280Vac / Linear Phase Control", "../products/WG A8 6 LC.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "MMPB MODULE BOARD WITH WG A8", "../products/WG MMPB.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
 
 aux1 = insFld(foldersTree, gFld("DC Input - Triac Output - 1 Phase - Dinrail Mounting (WG M8) ",""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
    docAux = insDoc(aux1, gLnk("B", "WG M8 6D 03Z/R : 600V peak-off-state / 3A / 24-280 Vac", "../products/WG M8 6D.pdf "))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG M8 6D 05Z/R : 600V peak-off-state / 5A / 24-280 Vac", "../products/WG M8 6D.pdf "))
    docAux.iconSrc = "pdf_logo.gif"


  aux1 = insFld(foldersTree, gFld("DC Input - Triac Output - 1 Phase - Chassis Mounting (WG A5)", ""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A5 6DXX Z/R    : 600V peak-off-state / 10-40A / 24-280Vac", "../products/WG A5 6D.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A5 6DXX Z/R LD : 600V peak-off-state / 10-40A / 24-280Vac", "../products/WG A5 6D_8D LED.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A5 8DXX Z/R    : 800V peak-off-state / 10-40A / 24-480Vac", "../products/WG A5 8D.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A5 8DXX Z/R LD : 800V peak-off-state / 10-40A / 24-280Vac", "../products/WG A5 6D_8D LED.pdf"))
    docAux.iconSrc = "pdf_logo.gif"

  
aux1 = insFld(foldersTree, gFld("DC Input - BTB Thyristor Output - 1 Phase - Chassis Mounting (WG 280/480/660)", ""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
    docAux = insDoc(aux1, gLnk("B", "WG 280 DXX Z/R : 600V peak-off-state / 10-125A / 24-280Vac", "../products/WG 280 D.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG 280 DXX Z/R LD : 600V peak-off-state / 10-125A / 24-280Vac", "../products/WG 280 D LED.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG 280 DXX Z/R-2P : 600V p-o-s/ 10-50A / 24-280Vac DUAL POLE", "../products/WG 280 D Z-2P.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG 480 DXX Z/R : 1200V peak-off-state / 10-125A / 24-480Vac", "../products/WG 480 D.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
        docAux = insDoc(aux1, gLnk("B", "WG 660 DXX Z/R : 1600V peak-off-state / 10-125A / 24-660Vac", "../products/WG 660 D.pdf"))
    docAux.iconSrc = "pdf_logo.gif"

aux1 = insFld(foldersTree, gFld("DC Input - Lower Input Control - BTB Thyristor output - 1 Phase (WG 480)", ""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
docAux = insDoc(aux1, gLnk("B", "WG 480 EXXX : 3-32 Vdc, 6mA", "../products/WG 480 E.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
docAux = insDoc(aux1, gLnk("B", "WG 480 RXXX : 7-24 Vdc, 6mA", "../products/WG 480 R.pdf"))
    docAux.iconSrc = "pdf_logo.gif" 
  
aux1 = insFld(foldersTree, gFld("DC Input - BTB Thyristor Output - 3 Phase - Chassis Mounting (WG A3)", ""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A3 8DXX Z/R : 800V peak-off-state / 10-45A / 24-420Vac", "../products/WG A3 8D.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A3 12DXX Z/R : 1200V peak-off-state / 10-45A / 24-480Vac", "../products/WG A3.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A3 16DXX Z/R : 1600V peak-off-state / 10-45A / 24-660Vac", "../products/WG A3.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
      
aux1 = insFld(foldersTree, gFld("DC Input - BTB Thyristor Output - Motor Reversing - Chassis Mounting (WG A0) / Moduleboard (MPBW4)", ""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A0 12DXX Z/R : 1200V peak-off-state / 10-45A / 48-480Vac", "../products/WG A0.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A0 16DXX Z/R : 1600V peak-off-state / 10-45A / 48-660Vac", "../products/WG A0.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "MPBW 4R WITH WG A8", "../products/WG MPBW 4R.pdf"))
    docAux.iconSrc = "pdf_logo.gif"


aux1 = insFld(foldersTree, gFld("AC Input - Triac Output - 1 Phase - Dinrail Mounting (WG M8)",""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
   docAux = insDoc(aux1, gLnk("B", "WG M8 6B 05Z/R : 600V peak-off-state / 5A / 24-280 Vac", "../products/WG M8 6B05.pdf "))
    docAux.iconSrc = "pdf_logo.gif"
   
   
aux1 = insFld(foldersTree, gFld("AC Input - BTB Triac Output - 1 Phase - Chassis Mounting (WG A5)", ""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A5 6AXX Z/R : 600V peak-off-state / 10-40A / 24-280Vac", "../products/wg A5 6A.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG A5 8AXX Z/R : 800V peak-off-state / 10-40A / 24-480Vac", "../products/wg A5 8A.pdf"))
    docAux.iconSrc = "pdf_logo.gif"

aux1 = insFld(foldersTree, gFld("AC Input - BTB Thyristor Output - 1 Phase - Chassis Mounting (WG 280)", ""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
    docAux = insDoc(aux1, gLnk("B", "WG 280 AXX Z/R : 600V peak-off-state / 10-125A / 24-280Vac",  "../products/wg 280 A.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
   

aux1 = insFld(foldersTree, gFld("Monitoring Relay", ""))
  aux1.iconSrc = ICONPATH + "diffFolder.gif"
  aux1.iconSrcClosed = ICONPATH + "diffFolder.gif"
    docAux = insDoc(aux1, gLnk("B", "WG 420 DXXZ-MR", "../products/wg 420 D MR.pdf"))
    docAux.iconSrc = "pdf_logo.gif"
    docAux = insDoc(aux1, gLnk("B", "WG 480 NXXZ/R-MR", "../products/wg 480 N-MR1.pdf"))
    docAux.iconSrc = "pdf_logo.gif"